ELECTRIC, WITH AN EDGE

Single Phase Overhead Completely Self Protected (CSP) Transformer

5/5

Single Phase Overhead Completely Self Protected (CSP) Transformer

Supply Ability

Supply Ability: 500 Set/Sets per Month 25kva 37.5kva 50kva single phase pole mounted distribution trans

 

Packaging & Delivery

Packaging Details: International Packing Method according to client’s requirement.
25kva 37.5kva 50kva single phase pole mounted distribution transformer 75kva 250kva,100kva high voltage single phase transformer

Video Description

Basic introduction

Daelim Belefic Single Phase Overhead Transformer is designed and produced normally for stepping utility distribution voltages (ranging from 2400 to 34500 volts) down to lower utilization voltages. Although some are used for stepping down to commercial and industrial voltages such as 277, 240/480, 2400 and 4800, most are used for stepping down to the single-phase voltage of 120/240.


These transformers are also used for small substations, miscellaneous applications and can serve to step up voltages.

Production Description

This type of transformers are CSP type, which can protect itself from thunder and lighting, short circuit and protect the transiting and distribution line from current failure because of self-malfunction. Except from some similarities such as cylinder tank, hooks, lifting lugs, grounding devices, nameplates, core and winding with the conventional type. This type of transformers have characteristics and devicesas follows: One or two high voltage bushings are on the cover with fuse. One or two arresters are installed on the wall of the tank, whose top end is near to the high voltage bushing, and connected to the bushing by a copper strip. One secondary breakers witch is above the winding inside the tank, and here are operating handle, overload reset and signal light. Low voltage bushing is educed from the wall of the tank, grounding device is fixed to position X2. One end of the single bushing leads out through the high voltage bushing, the other end is ground connection. All units are built in accordance with IEC60076, ANSI/IEEEC57.12.20,CSAC2.1-06, CSAC2.2-06 and etc.

Read my article on Types of distribution transformer

Single Phase Self Protected (CSP) Transformer (2) (1)
Single Phase Self Protected (CSP) Transformer (3) (1)
10kv class three-phase oil-immersed distribution transformer

Technical Specification

Single Phase Overhead Completely Self Protected (CSP) Transformer data
20kv class-three-phase oil-immersed distribution transformer

Note: The above data is only subject to our standard design, special requirements can be customized.

Type CSP , 5kV and Below, 10-100 kVA

Single Phase Self Protected (CSP) Transformer (4) (1)

Class A: Two fully insulated high voltage bushings, two arresters, two protective links, and an external breaker handle. Suitable for application on either wye or delta distribution systems. Single-position pole mounting in accordance with latest ANSI standards.

Class B-1: Two fully insulated high voltage bushings, one arrester, two protective links, and an external breaker handle. Normally applied on solidly grounded systems.

Class B-2: Not Available.

Class B-3: Not Available.

Type CSP , Above 5kV, 10-100 kVA

Single Phase Self Protected (CSP) Transformer (5)

Class A: Two fully insulated high voltage bushings, two arresters, two protective links and an external breaker handle suitable for application on either wye or delta distribution systems. Single-position pole mounting in accordance with latest ANSI standards.

Class B-1: Two fully insulated high voltage bushings, one arrester, two protective links and external breaker handle. Normally applied on solidly grounded systems.

Class B-2: One fully insulated high voltage bushing, one arrester, one protective link and external breaker handle suitable only for application on solidly grounded distribution systems.Single-position pole mounting in accordance with latest ANSI standards.

Class B-3: Same as Class B-2 except with two-position mounting.

66kv class-three-phase two winding nltc power transformer
Single Phase Self Protected (CSP) Transformer (6)
Single Phase Self Protected (CSP) Transformer (7)
daelim certifcate
66kv class-three-phase two winding oltc power transformer
Through years of international engineering experience, our factory is capable of producing transformers meeting various international standards, such as IEC, IEEE, ANSI, CSA.
Customer Visit
WORLD -WIDE CUSTOMERS COMMENTS & FEEDBACk
110kv class-three-phase three winding nltc power transformer

Here is some of comments from our world-wide customers.
[ TRUST YOU WILL LIKE OUR SERVICES, QUALITY AND PRICE ]

WORLD -WIDE CUSTOMERS COMMENTS & FEEDBACk
110kv class three-phase three winding oltc power transformer
Customer Visit
Q&A

Q: Are you a trading company?
A: No. We are a transformer manufacturer. We have our own transformer factory in Jiangsu province.

Q: How long is your delivery time?
A: Generally it is 20 days if the goods are in stock, or 30 days if the goods are not. It is according to the quantity.

Q: What is the standard of package?
A: Export standard package or special package according to customer’s requirement.

Q: Which markets have you already sold your products to?
A: South America, North America, Europe, Middle East, Africa, etc.

Q: How long have you been worked in the electric industry?
A: We have been worked in the electric industry for nearly 25 years.

Q: Why should I choose Daelim?
A: After comparing the quality, delivery, and price of the same products, you will find out the answer.

Company Profile

BEIJING DAELIM GREEN EP TECHNOLOGY CO., LTD. Locates in Beijing, China,is a professional transformer manufacturer and international electrical engineering contraction company. The expert team of DAELIM controls each process from product development to design , production and manufacturing in order to achieve its goals. They have strong R&D team and they have more than 20 years of transformer design experience and are familiar with lots of international transformer standards, such as IEC, IEEE / ANSI,CSA, etc. The technical team of DAELIM are experts, electrical engineers, CAD first-class draftsmen, etc. They also use the latest technology, machines and other modern facilities to produce transformers, but meanwhile DAELIM transformers are made of qualified standard materials which meets the standards of world-renowned suppliers through international procurement as well.

daelim factory