What is The Use of Power Transformer?

Power Transformer: The Ultimate FAQ Guide

Power transformers are one of the main equipment in power plants and substations.

The use of the transformer is multi-faceted not only to increase the voltage and send the electric energy to the electricity consumption area. It can also reduce the voltage to the voltage used at all levels to meet the needs of electricity.

In short, both step-up and step-down must be completed by a power transformer.

ues of power distribution transformer is to increase voltage and reduce power loss

In the process of transmitting electric energy in the power system, two parts of voltage and power will inevitably be lost. When the same power is delivered, the voltage loss is inversely proportional to the voltage, and the power loss is inversely proportional to the square of the voltage.

The transformer is used to increase the voltage, and the power transmission loss is reduced.

The transformer is composed of two or more coil windings wound on the same iron core. The windings are connected by an alternating magnetic field and work according to the principle of electromagnetic induction.

The installation location of the transformer should be considered for ease of operation, maintenance and transportation. At the same time, a safe and reliable place should be selected. When using a transformer, the rated capacity of the transformer must be selected reasonably.

When the transformer is running at no load, a larger reactive power is required. These reactive power must be supplied by the power supply system.

If the capacity of the transformer is selected too large, it will not only increase the initial investment, but also keep the transformer in no-load or light-load operation for a long time. This will increase the proportion of no-load loss, reduce the power factor, and increase the network loss. This operation is not economical. It’s unreasonable.

If the transformer capacity is too small, the transformer will be overloaded for a long time and the equipment will be easily damaged. Therefore, the rated capacity of the transformer should be selected according to the needs of the electrical load, and should not be too large or too small.

Leave a Reply

Share:

More Posts

66kv transformer

66kv Transformer Fault Analysis For a 66kV transformer secondary winding deformation fault case, we elaborated and analyzed the whole process of 66 kv transformer from

transformer bushing

Distribution Transformer Bushing Casing Insulation Degradation Diagnosis In this paper, the author introduces a 500kV main transformer bushing with abnormal dielectric loss, and theoretically analyzes

bess power plant

Key Technology Design of Bess Power Plant The rapid development of social economy has enhanced people’s demand for electric energy and charging station construction requirements.

portable electrical substation

Portable Electrical Substation, The Ultimate Guide portable electrical substations portable electrical substation belongs to the manufacturing technology field of special substations in the power system,

Send Us A Message